C200 CO2 Incubator

Large Volume CO2 Incubator

The C200 CO2 incubator is a large volume incubator from Labotect with a 200L volume capacity.The Incubator C-200 produces a defined atmosphere in its interior with regard to the parameters of temperature, relative humidity, CO2 and optional O2 content. Due to the stability of temperature and gas concentrations, as well as, active humidification, it is suitable for the cultivation of biological samples in research and medicine. The key advantages of the C200 include:

Active sterile humidity – To minimise the contamination risk this incubator features an active sterile humidity supply with a vaporizing module operating at 120 °C and an external water supply container. This means there is no need of an internal water reservoir. Aqua bidest is provided over a pump into a vaporiser (heated up to 120°C) in very fine drops. This sterile water steam provides the incubator with humidity that can be regulated over a humidity sensor. With this active humidification recovery times can be reduced extremely.

Double beam IR sensor – assures exact measuring and short recovery times of the CO2 value – all external effects are eliminated by using this sensor

Direct heating system – The intelligent temperature control system and the panel heated interior chamber and door care for a dry inner chamber and assures very homogeneous temperature distribution in the interior.

LaboDat software – possibility to measure and save incubator’s data over a special period of time

Key features of the C200 CO2 Incubator


  • Electro-polished stainless steel with coved corners
  • Shelves and ductwork easily removable for cleaning purpose


  • Panel heated interior chamber and door
  • Intelligent temperature control system for dry inner chamber

Active sterile Humidity supply:

  • External water supply container


  • Dual beam infrared sensor
  • Measurement independent from temperature and humidity

Short recovery times:

  • For all adjustable parameters through optimized microprocessor control

Easy handling:

  • Menu guided
  • Large, back-lit LCD
  • Foil keyboard

Diagnostic system:

  • Optical and acoustic alarm if set point deviation occurs
  • Alarm messages are retained in non-permanent memory
  • Independent over-temperature control
  • Set points are saved in case of power interruption
  • Remote alarm


  • O2-control: connection for N2 possible
  • Subdivided inner glass door
  • Lockable front door
  • Access port


  • Remote alarm (potential free)
  • RS485 interface for data collection with optional available software LaboDat+

C16 CO2 Incubator Specifications


  • Dimensions 680 x 690 x 930 mm (w x d x h)


  • Volume 200 l
  • Electro-polished stainless steel
  • Shelves height adjustable


  • Panel heated interior chamber and door
  • Range 28°C – 42°C starting 5°C above ambient temperature
  • Stability / Uniformity ± 0.1°C / 0.3°C
  • Over-temperature alarm 32°C – 47°C


  • Dual beam infrared sensor
  • Range 0 – 10%
  • Stability 0.1%

O2-control < 21%:

  • Measurement with galvanic sensor
  • Connection of N2
  • Range 1 – 21%


  • Active Sterile Humidity supply through vaporizing module operating at 120°C
  • Measuring range 0 – 98% rH / Range 60 – 95% rH


  • Voltage/frequency 230V AC, 50/60Hz or 115V AC, 50/60Hz; 170W
  • Inlet pressure for gas 0.8 bar
  • Ambient temperature 18°C – 30°C


  • Safety class I; safety type IP 21
  • Class IIa for all usage according to EC-Directive 93/42
  • EN 61010 conform

Optional Accessories for the C200

Stacking kit – for safe positioning – Safe, easy and space-saving positioning of the devices in the laboratory – 15cm and 115cm

Subdivided inner glass door – for better recovery times: Subdivided inner glass door with 6 small doors, 6 shelves à 500 x 222 mm, 3 shelves 502mm x 481mm Better recovery times of all parameters, Easy cleaning of inner door possible

Access port – diameter 30mm

Lockable front doorHigher security for your cultures

Furthermore we offer the control of O2 as option (O2 < 21%).


To request more information from Parallabs on the C200 Incubator



Comments are closed.