C60 CO2 Incubator

60L Volume CO2 Incubator

The C60 CO2 incubator is a mid volume incubator from Labotect. The key advantages of the C60 include:

Active sterile humidity – To minimise the contamination risk this incubator features an active sterile humidity supply with a vaporizing module operating at 120 °C and an external water supply container. This means there is no need of an internal water reservoir. Aqua bidest is provided over a pump into a vaporiser (heated up to 120°C) in very fine drops. This sterile water steam provides the incubator with humidity that can be regulated over a humidity sensor. With this active humidification recovery times can be reduced extremely.

Double beam IR sensor – assures exact measuring and short recovery times of the CO2 value – all external effects are eliminated by using this sensor

Direct heating system – The intelligent temperature control system and the panel heated interior chamber and door care for a dry inner chamber and assures very homogeneous temperature distribution in the interior.

LaboDat software – possibility to measure and save incubator’s data over a special period of time

Key features of the C60 CO2 Incubator

Interior:

  • Electro-polished stainless steel with coved corners
  • Shelves and ductwork easily removable for cleaning purpose

Temperature:

  • Panel heated interior chamber and door
  • Intelligent temperature control system for dry inner chamber

Active sterile Humidity supply:

  • External water supply container

CO2-control:

  • Dual beam infrared sensor
  • Measurement independent from temperature and humidity

Short recovery times:

  • For all adjustable parameters through optimized microprocessor control

Easy handling:

  • Menu guided
  • Large, back-lit LCD
  • Foil keyboard

Diagnostic system:

  • Optical and acoustic alarm if set point deviation occurs
  • Alarm messages are retained in non-permanent memory
  • Independent over-temperature control
  • Set points are saved in case of power interruption
  • Remote alarm

Options:

  • O2-control: connection for N2 possible
  • Subdivided inner glass door with 4 small doors

Interfaces:

  • Alarm contact (potential free)
  • RS485 interface for connection of optional available software LaboDat+

C60 CO2 Incubator Specifications

Exterior:

  • Dimensions 510 x 540 x 720 mm (w x d x h)

Interior:

  • Volume 60 l
  • Electro-polished stainless steel
  • Shelves height adjustable

Temperature:

  • Panel heated interior chamber and door
  • Range 28°C – 42°C starting 5°C above ambient temperature
  • Stability / Uniformity ± 0.1°C / 0.3°C
  • Over-temperature alarm 32°C – 47°C

CO2-control:

  • Dual beam infrared sensor
  • Range 0 – 10%
  • Stability 0.1%

O2-control < 21%:

  • Measurement with galvanic sensor
  • Connection of N2
  • Range 1 – 21%

Humidity:

  • Active sterile humidity supply through vaporizing module operating at 120°C
  • Measuring range 0 – 98% rH / range 60 – 95% rH

Supply:

  • Voltage/frequency 230V AC, 50/60Hz or 115V AC, 50/60Hz; 170W
  • Inlet pressure for gas 0.8 bar
  • Ambient temperature 18°C – 30°C

Classification:

  • Safety class I; safety type IP 21
  • Class IIa for all usage according to EC-Directive 93/42
  • EN 61010 conform

Optional Accessories for the C60

Stacking kit – for safe positioning – Safe, easy and space-saving positioning of the devices in the laboratory

Subdivided inner glass door – for better recovery times: Subdivided inner glass door with 4 small doors, 2 shelves à 336 x 335 mm, Better recovery times of all parameters, Easy cleaning of inner door possible

Furthermore we offer the control of O2 as option (O2 < 21%).

Downloads

To request more information from Parallabs on the C60 Incubator

Comments are closed.