Labo C-Top Incubator

c-top_offenBenchtop incubator for up to date, individual cell cultivation

Advantages of Labo C-Top:

  • Approved medical device
  • Two independent and separate incubation chambers;
    Parameters (gas flow, temperature) can be adjusted individually
  • Optimized gassing with premixed gas
  • Optimized temperature distribution by double heated chamber from top and bottom;
    Very fast heating up and recovery times
  • Reliable humidity system;
    Current value of relative humidity is displayed (% rH)
  • Convenient glass control panel
  • Space saving
Incubation chambers Aluminum milled and eloxated
In the lower part:

  • Slots provide full contact to culture dishes
  • Adaption for humidity block
  • Gas inlet

Easy cleaning
Independent, for use with (per chamber):

  • 4 x IVF 4-well dishes 66×66 mm
  • 4 x Petri dishes Ø 60 mm
  • 10 x Petri dishes Ø 35 mm
Temperature Overall heating from top and bottom
Very homogeneous temperature distribution
Humidity Humidification by means of humidity block
Reservoir sufficient for 4 days (when gassing with 20 ml/min)
Humidity block autoclavable
Humidity alarm disengageableCurrent value of relative humidity is displayed (% rH)
Gassing Connection of premixed gas (CO2, O2 < 21 %, N2)
Separate measuring and regulation of gas flow for each chamber
Automatic gas purge when closing the chamber
Recovery times Short recovery times for all parameters through microprocessor controlled regulation
Use of glass panel Homogeneous glass cover
Sensoric buttons integrated in glass
Image of placements for marking inserted dishes at the glass cover
Easy operation and menu navigation
Lit LCD at working place height
Trouble check system Optical and acoustic alarm in case of set point deviation or defective sensor
Independent over-temperature protection
Remote alarm
Options PC software LaboDat+ for documentation of incubator’s parameters
Second gas inlet for use of different gas mixtures for each chamber
Lockable lids
Interfaces Remote alarm (potential free)
RS485-interface for data logging with optional available PC software LaboDat+
Exterior Dimensions 403 x 225 x 155 mm (w x d x h)
Weight 8.8 kg
Interior Two chambers with 0.5 liters each
Mixed load possible
Temperature Overall heating from top and bottom of each chamber
Range 30 °C – 42 °C from 7 °C above
ambient temperature
Stability / uniformity ± 0.1 °C / ± 0.3 °C
Gassing Premixed gas
Gas flow adjustable between 20 ml/min and 30 ml/min
Flow rate after opening the lid (automatic gas purge):
250 ml/min for 3 minutes
Power Supply 110 – 230 V AC, 50/60 Hz, 100 VA
Primary pressure for gas 0.8 bar
Ambient temperature 18 °C – 30 °C
Classification Safety class II
Class IIa for every usage according to EC-Directive 93/42/EEC
EN 61010 conform
REF 15070

Labo C-Top with lockable lids

Higher security for your cultures
Limited access to the cultures

REF 15069

Labo C-Top with second gas inlet

Every chamber to be gassed with different mixtures at the same time

Comments are closed.